Easy DIY: Velvet Ribbon Bows Part 3 - Pink Bows & Twinkle Toes

Easy DIY: Velvet Ribbon Bows Part 3

Hello, crafters!

I’m back AGAIN with another DIY bow post! If you didn’t know already, I have a thing for all ribbon bows! Especially pink ones! 🙂

Like I said last week, bows are perfect for anything and everything! They add instant cuteness to each and every thing they tough!

Easy DIY: Velvet Ribbon Bows Part 3 - Pink Bows & Twinkle Toes

This bow is very similar to last week’s bow. The only difference is that this bow has tails!

I love all bows (obvi!), but I think bows with tails might be my favorite kind of ribbon bows!

Supplies:

Just like our last bow tutorial, I have a video that breaks everything down for you!

And just like that, another bow has been born! 🙂

If you’ve caught the bow-making bug, check out these other bow and craft tutorials!

I hope y’all had fun with our little project!

I want to create more crafty content for y’all this year, so I hope to be back again soon with another easy tutorial!

Until then, Happy Crafting!

<3 Natalie


Easy DIY: Velvet Ribbon Bows Part 3 - Pink Bows & Twinkle Toes


Affiliate links are in use in this blog post.

Advertisements
Easy DIY: Velvet Ribbon Bows Part 2 - Pink Bows & Twinkle Toes

Easy DIY: Velvet Ribbon Bows Part 2

Hello, crafters!

I’m back again with another adorable, bow tutorial!

Velvet bows are perfect for just about anything! You name it, and a bow would make it that much better! Trust me.

Easy DIY: Velvet Ribbon Bows Part 2 - Pink Bows & Twinkle Toes

If you’ve never made a bow like this before, then you might find it tricky at first. If you do, just keep practicing. After making a few of these cuties, you’ll become an expert!

Supplies:

Just like our last bow tutorial, I have a video that breaks down all the steps for you!

Tada! You now have an adorable bow!

Wasn’t that fun?! I could sit around making bows all day, and I actually did my freshman year of college! I used to sit on the floor of my dorm room and make bows while watching Netflix. Oh, to be a freshman in college again! 🙂

If you now have the bow-making bug, check out these other bow and craft tutorials!

I hope y’all had fun making velvet bows with me!

Is there a specific kind of bow you’d like to see me make? If so, leave a comment below or send me a message! I would love to hear from you!

I’ll be back again soon with another bow tutorial!

Until then, Happy Crafting!

<3 Natalie


Easy DIY: Velvet Ribbon Bows Part 2 - Pink Bows & Twinkle Toes

 

Easy DIY: Felt Ball Wreath Ornaments - Pink Bows & Twinkle Toes

Easy DIY: Felt Ball Wreath Ornaments

Hello, Crafters!

I’m back again this week with another easy + fun crafting tutorial! Today, I’ll be showing you how to make some super cute, wreath ornaments.

Easy DIY: Felt Ball Wreath Ornaments - Pink Bows & Twinkle Toes

This week’s wreath project combines a bit of last week’s Easy DIY Velvet Bow project as well!

Supplies:

Once again, I’m sharing a short video tutorial with y’all! With projects like this, I think it’s easier to watch someone show you all the steps and have the ability to pause and rewind when you get stuck!

[Related: Easy DIY: Felt Pom Pom Garland]

Easy DIY: Felt Ball Wreath Ornaments - Pink Bows & Twinkle Toes

In the video tutorial, I made three different wreaths — One traditional Christmas, one winter, and one girly pink! I just love all the different color combinations!

These wreaths would look SO cute on your Christmas tree or as decoration on all your presents this holiday season!

I also think they would be adorable as jewelry for a little girl! These are perfectly sized for bracelets and with a few more felt balls, you could easily make a necklace! 🙂

In this video, I show you how to make the velvet bows I topped off all my wreaths with. For a list of supplies, check out the full blog post — Easy DIY: Velvet Ribbon Bows.

Easy DIY: Felt Ball Wreath Ornaments - Pink Bows & Twinkle Toes

I hope you all enjoyed crafting again with me this week! If you ever have any crafting tutorial suggestions, don’t be afraid to reach out! I would love to hear from you!

<3 Natalie


Easy DIY: Felt Ball Wreath Ornaments - Pink Bows & Twinkle Toes


This blog post contains affiliate links.

Easy DIY: Velvet Ribbon Bows - Pink Bows & Twinkle Toes

Easy DIY: Velvet Ribbon Bows

Hello, crafters!

It’s been WAY too long since I posted a crafting tutorial for you all! Today is the day that I finally post a brand-new how-to for you! (Wasn’t that a fun rhyme?!) 🙂

You might’ve already guessed this, but today we will be making ribbon bows! I LOVE bows. They are just darling and can be added to pretty much anything and will up the cute factor by over 1,000%!

Easy DIY: Velvet Ribbon Bows - Pink Bows & Twinkle Toes

A few months back, I got the hankering to make bows and not just any bows. I really wanted to make velvet bows! So, I hopped in the car, went to Hobby Lobby, and picked up three beautiful spools of 7/8 inch velvet ribbon!

If you follow me on Instagram, then you might’ve caught my post and Story from a while back where I talked you through two of my favorite types of bows! (I have a third favorite, but I’m going to save that tutorial for another day!)

Easy DIY: Velvet Ribbon Bows - Pink Bows & Twinkle Toes

Thanks to Instagram Stories, I have a handy, video tutorial to share with you all today!

Supplies:

I love making bows and after making a few with me, I’m sure you now love making them too!

I have another crafting tutorial featuring one of these bows coming your way soon! So stay tuned!

Until then, Happy Crafting!

<3 Natalie


Easy DIY: Velvet Ribbon Bows - Pink Bows &amp; Twinkle Toes


Affiliate links are in use in this blog post.

Stamped Greeting Cards: Easy DIY

Hello Crafters!

Those of you that follow me on Instagram (if you’re not already, follow me @pinkbowstwinkletoes) have seen several posts in the last few weeks featuring some homemade greeting cards.

I love how all of my greeting cards have turned out, so I figured I’d write up a little tutorial for you all!

When I say making these cards is super easy, I mean super duper easy peasy!  You can make several cards in 10 minutes or less!

IMG_9898

Supplies:

  • Cardstock (I used white, but you can use a color if you prefer)
  • Paper trimmer or scissors
  • Ink pads
  • Stamps
  • Markers (I like Staedtler Dual Tips)
  • Ruler (optional)
  • Pencil (optional)

Step 1:

Take a sheet of cardstock and cut it in half lengthwise creating two strips.

Step 2:

To make a folding card, fold each strip in half.

To make flat cards, cut each strip in half.

I’ll be making both types of cards in this tutorial!

IMG_9878

Here are the stamps I’ll be using for my cards.

I bought these at Michaels several years ago. The season was changing, so everything in their spring collection was one sale.  I went a little crazy (who doesn’t love clearance?!) and bought every stamp set I could find from this collection.  I have about eight packs! 🙂

I love the watercolor ink look, so I’m using two pink inks and an orange one for my first owl.

Step 3:

Take your ink pads and apply each color randomly to your stamp.

If you’re using a light ink and several dark ones (like me!), I suggest using the light ink first and then applying the dark inks.  Going in that order prevents you from ruining your light colors with dark ones.

IMG_9879

Step 4:

Stamp it!

I chose to use this owl on a folding card, so I stamped my image on the right side of the opened card.  I find folded cards easier to stamp when they are opened up.

Step 5:

Add your message!

I like to take a ruler and draw a pencil line before I go in and add my copy.  If I don’t add a line, I always end up writing on a slant!

Step 6:

Add a fun message on the inside of your card!

On the inside of my card, I’m going to write something along the lines of “That’s owl speak for…”

I’m going to repeat steps 1-6 and make a flat floral card now.

I mixed orange and coral red ink for this one.

IMG_9882

I love how these two inks look when mixed together!

I added “Yay” to this card!  I think it’ll be very cute for celebrations and such!

I also decided to make a blue and green owl!

IMG_9885

This time, I stamped the owl on a flat card!

There are so many fun “owl” sayings out there, that I’m bound to use another one when I send out this card! 🙂

IMG_9899

I hope you all enjoyed this super duper easy peasy tutorial!

If I weren’t taking photos while making these cards, they would’ve taken me less than ten minutes to make!

Happy Crafting!

<3 Natalie

 

 

Easy DIY: Felt Pom Pom Garland

Hello Crafters!

I have a super easy, super fun, and super cute DIY project to share with you today!

img_7419

Supplies:

  • Felt Balls (I bought this pack on Amazon)
  • Twine
  • Sharp scissors
  • Large eye needle
  • Clear nail polish (optional)

img_7400

The felt balls I purchased are a grab bag of 50, so I had no idea what colors I was going to get until I opened the package.

1) Separate your felt balls by color

This will make it much easier to see what colors you have and what color scheme you want for your garland.

img_7402

2) Choose your garland color

After looking at my color choices, I chose orange, purple, and pink for my first garland.

img_7401

3) Lay your balls out in some sort of pattern

I chose an alternating pattern, because my choices were limited by the number of purple balls I had.

img_7403

4) Thread your large eye needle with twine

I chose white twine for this garland, because I thought it would go best with my color palette.

img_7404

5) Begin stringing your garland

I eyeballed where I thought the middle of each pom pom was and threaded them accordingly.  If your balls aren’t perfectly centered, that’s okay!  I know that a few of mine are a little wonky!  That just adds a littler personality to the project! 🙂

img_7405

6) Keep on threading

img_7406

Once all your pom poms are threaded, we’re going to tie off the garland.

7) Create a small loop at the end of your garland

You can either cut your twine before or after creating your loop.  I cut my thread after just in case something went wrong with the string or loop.

img_7407

8) Tie a knot to create a small loop for hanging your garland

9) Cut off the excess twine

img_7408

10) Do steps 7-9 again to create another loop on the other side of the garland

(Optional step) 11) Paint your knots with clear nailpolish

I like to paint my knots with polish to insure that they don’t come untied at any time.

img_7409

12) Enjoy your pretty new garland!

img_7421

After looking at my felt balls again, I saw that I had enough neutral ones to make another garland!

img_7410

I used cream, taupe, and black for my second garland.

img_7411

I went with a similar alternating design for this garland too.

img_7412

In about 20 minutes, I made two very pretty, very fun garlands!

These beauties are going to be perfect for photo props, bedroom/office decor, and party decor!

img_7420

I hope you enjoyed this super easy garland tutorial!

If you have any questions, feel free to leave them in the comments below!

Happy Crafting!

<3 Natalie

DIY Planner Dividers: Personal Size

Hi everyone!

I have a super easy paper crafting project for you today!

I recently purchased a kikki.K personal planner!  I love my new planner, but I didn’t love the dividers that came with it.  I’ve seen so many cute handmade dividers online, so I decided to make some myself!

IMG_8265

Here’s a little sneak preview of the finished product!

IMG_7782

Supplies:

  • Large paper dividers or file folders
  • Paper cutter
  • Glue dots
  • Pencil
  • Scissors
  • Dividers that already fit your planner
  • Decorative papers and appliques
  • 6-hole punch (find one here)

The dividers I have came with seven tabs.  I knew I only wanted four tabs for my dividers, so I had to make a few adjustments to make the dividers fit and not look awkward!

IMG_7785

You’re going to start by tracing your first divider onto one of the large file folders.

IMG_7786

Leave a little space at the bottom of the first tab.

IMG_7788

Take the next divider “in line” and scooch it up a little to create a larger tab for your first divider.  Finish tracing the rest of the tab.

IMG_7790

This is actually a picture of the second divider, but you can still see what the divider tabs should look like.

Once you have the dividers drawn out, cut them with your paper cutter.  I cut all the straight edges first.

IMG_7792

At first, I wasn’t sure how I was going to cut the tabbed side of the divider.  I decided to cut part of it with the paper cutter and the actual tab area with a pair of scissors.

While using the paper cutter, I had to be very careful not to accidentally slice my tab right off!  To avoid that happening, I stopped the paper cutter about half an inch from the tab on each side.  I then finished cutting it with some scissors.

Getting the inside corners perfectly rounded was pretty tough, but I think I managed okay!

IMG_7795

Here are all the cut out dividers!

You may have noticed that there are five papers in the picture!  About halfway through my project, I decided to make a dashboard to match my dividers!

To make the dashboard, just line up all of your original dividers, trace around them, and then cut it out!  It’s super easy!

IMG_7826

I love the striped, metallic dividers, but I wanted to add a little something else to them!

I found these fun Project Life cards and cardboard appliques at Hobby Lobby.  When I saw them, I knew they’d be perfect for this project!

IMG_7800

I played around with a few different design options.

IMG_7829

Here’s what I decided on!

IMG_7832

I used some adhesive, glue dots to attach all of the decorative items.  I’m rather heavy handed with every kind of adhesive, so you may not find this many glue dots necessary! 🙂

IMG_7918

Now it’s time to punch the holes!  Once all of the holes are punched, your dividers are complete!

Dividers

Here are all of the finished dividers!

Aren’t they so cute?!  I love the light pink with all of the gold accents! So classy!

IMG_8244

I absolutely love the way the dashboard and dividers look with my light blue planner and matching, pink planner clips!

I hope you’ve enjoyed this little tutorial!

Happy Crafting and Happy Planning!

Bow signature pink

 

 

DIY Brush Calligraphy Gift Tags

Hi everyone!

I have a super quick and easy Christmas (or any holiday) craft for you!

I was wrapping some Christmas presents in my college apartment a few days ago when I realized that I didn’t have any gift tags! Uh oh!  I quickly realized that I could easily make some tags out of sticker paper and brush pens!

IMG_7132

Supplies:

  • Avery sticker paper
  • Colored pens or markers
  • Scissors

IMG_7133

I’ll be using Tombow Dual Brush Pens but Crayola markers will work as well!

Green: 277

Red: 847

There are only three steps to this little craft.

  1. Write/Draw your desired names
  2. Cut out the names
  3. Stick them on your packages

Here’s a video of me demonstrating my brush lettering technique.

To achieve lettering like mine, all you have to do is apply pressure on the down stroke and release the pressure on the up stroke.  Sounds easy doesn’t it?  The steps are easy, but it takes a little bit of practice!  Definitely test out your writing on some printer paper before your start writing on the sticker paper!

For more tips, check out Pieces Calligraphy!  I follow her on Instagram, and she is fantastic!

IMG_7114

Here’s the name I wrote in the video above.

The sticker paper absorbs the ink a little differently than sketchbook paper, so some of the edges are a little choppy.  I like to go back and smooth out a few of the edges.

IMG_7117

Now we cut!

I like to cut in a wavy pattern and conform to the edges of the name.

IMG_7138

All of the tags I’ve made so far have been for girls, so I’ve dotted every “i” and “j” with a heart.  The hearts add even more cuteness to the tags!

IMG_7140

Time to peel and stick!

IMG_7143

I’ve been placing my tags on the backs of my packages, but they’d also look quite nice on the front!

IMG_7142

Here are the fronts of a few of my very pretty packages!

IMG_6839

A few more pretty tags!

I absolutely love how these gift tags turned out!

They were so quick to make and look fantastic!

Happy Crafting and Merry Christmas!

Bow signature pink

 

DIY: Hand Painted Bubba Keg

Hi everyone!

Today, I’ll be sharing a Bubba Keg painting tutorial with you.

Bubba Kegs are very popular for college road trips and Woodser parties.  Some of my friends and I are going on a road trip to LSU in a few weeks, so I decided to paint my friend a Bubba Keg for her birthday.

I painted myself a Bubba Keg when I went on this same road trip two years ago, so I don’t have to worry about painting myself one for the trip this year!

IMG_5309Supplies:

  • Bubba Keg (I got mine on Amazon)
  • Acrylic Paint
  • Painter’s Tape
  • Modge Podge (I know it’s really called Mod Podge!)
  • Paintbrushes (in various sizes)
  • X-acto Knife

IMG_5312Martha Stewart Crafts:

  • Wedding Cake
  • Champagne (optional)

Buttercream:

  • Sapphire
  • Plum Polished
  • Petunia (optional)
  • Seaway
  • Darling Teal

As you may have noticed, I only ever use Martha Stewart Crafts acrylic paint, but Jo-Ann’s just came out with this new Buttercream line!  I couldn’t resist giving it a try!

IMG_5316Start by applying painter’s tape around the edges of the metal.  The metal portion is the only part of the mug we will be painting.

I went ahead and covered the entire handle as well.  I didn’t realize until after I took this picture that it would need to be protected too!

IMG_5317We’re going to use the white paint as our base coat.

IMG_5324Add three or four coats of white paint.  You want to completely cover the “Bubba” logo that is printed on the metal.

The idea is to create an even layer of paint for your design to be drawn on top of.

IMG_5326Once the white paint has dried (give it an hour at least), begin painting with the light turquoise.  IMG_5329This project is all about building up the color, so we’ll need to add several coats of each paint.

IMG_5335Add three or four coats of paint, until you’re satisfied with the opaqueness.

I let the light turquoise paint dry overnight.  I wanted to make sure it was completely dry before I began painting on my design.

I chose Ikat for this project!  Ikat is so pretty and super easy to paint!  If you’re also a fan of Ikat, you can continue on to read about how I created my design.  If you don’t like Ikat and would prefer another pattern, go for it!  Feel free to skip ahead to the end where I go over how to seal off and finish the Bubba Keg!

IMG_5336I wanted the blue paint to be the star of the show, so I’m going to use it for the larger portions of the Ikat design.

Start with a decent amount of paint on your brush and paint a rough diamond shape.

IMG_5339Add a tiny bit more paint to your brush.  Hold the brush perpendicular to the mug and begin dragging out the paint.

It’s okay if the sides aren’t symmetrical!  They aren’t supposed to be!

To see a video of the Ikat painting technique, click here.

IMG_5343Continue painting the diamond shapes all around the mug.  I ended up with six of them.

It’s okay if the distance between each diamond isn’t the same.  None of mine are!

IMG_5347Now we’re going to add little half diamonds between the large ones.

Start with the dark turquoise and paint a triangle.

IMG_5350Just like before, hold your brush perpendicularly and drag out the paint.

IMG_5351I chose to alternate top and bottom with the dark turquoise!   I think it adds a little something to the design!

IMG_5356Do the same steps as above but use the purple paint now.

IMG_5359We’re going to go back later and paint over these to make them look better and more opaque!

IMG_5362Once you’ve painted all of the diamonds, let the mug sit and dry for an hour or so.

IMG_5369Once the mug has had time to dry, go back and paint over each diamond with a smaller brush.

IMG_5451The smaller brush allows you to repaint each “spike” without messing them up and painting “outside the lines.”

I went over each of my diamonds twice. I wanted them to be super opaque!

After repainting, let the mug dry for several hours.  We don’t want any wet paint when we go to seal it!

IMG_5453Now comes the Modge Podge!  I know I call it the wrong name, but just roll with it!  Modge Podge is way more fun to say than Mod Podge! 🙂

Use a larger brush to apply Modge Podge all over your design.  I like to paint horizontally in one direction.

You can see some small chunks of Modge Podge in the picture.  Try your best to get all of those off before the Modge Podge dries.

If you’ve never used Modge Podge before, don’t get too concerned over the streaky whiteness that appears after applying it!  That will go away as it begins to dry!

IMG_5456After a few minutes, most of the whiteness has disappeared!

Add two or three coats of Modge Podge to the mug.  Wait at least 30 minutes between coats.

IMG_5458Once the Modge Podge has dried, we’re ready to finish of the Bubba Keg!

As you can see, quite a bit of paint got in the little crevice between the painter’s tape and the metal we were painting on top of.  We want to make sure that the paint on the mug isn’t glued to the painter’s tape!  That could make for a serious disaster!  We do not want all of our hard work ripped off!

IMG_5459To avoid such a serious disaster, we’re gong to take an X-Acto knife and cut the paint away from the tape.

Take the knife (it fits perfectly in the little groove) and add a little pressure while running it around the entire mug.

IMG_5464Do the same with the tape on the bottom.

IMG_5468Once you’ve peeled off the tape, our project is complete!

I absolutely love this color palette and the way the mug turned out!

I’m sure my friend will love it too!

Happy Crafting!!
Bow signature pink

DIY: Happy Birthday Banner

Hi everyone!

I have a super easy, birthday project to share with you today!

It’s my roommate’s birthday this week, so I made a birthday banner to hang in our apartment to celebrate!

IMG_5404Supplies:

  • 4.5 by 6.5 Cardstock Scrapbooking Paper
  • Ribbon
  • Acrylic Paint (I recommend metallic!)
  • Paintbrush
  • Scissors
  • Pencil
  • Scotch Tape
  • Hole Punch
  • Something Angled (I’m using a name tag)

Start the project by deciding what phrase you want to spell out with your banner.  I chose “Happy Birthday!”

Once you’ve decided on a phrase, count out the appropriate number of cardstock pages.

IMG_5405Use your angled object to create the shape of each banner piece.

I’m using a name tag I was given several years ago on my Bid Day.

Lay down your angled piece and trace with a pencil.

IMG_5408Cut along the pencil lines.

Go ahead and cut all of the banner pieces now.

IMG_5412Once you’ve cut the pieces, it’s time to hole punch them and then paint the letters.

I painted my letters in a basic font. I didn’t want anything too complicated.  A low maintenance font makes the project much easier to complete!

If you’re not comfortable free handing the letters with your paintbrush, draw them lightly with pencil first and then paint over the lines.

IMG_5414My paper pack came with many coordinating paper options, so I picked my favorites and alternated them for this project.

IMG_5421Now it’s time to string the letters together.

Thread the ribbon in and out of each punched hole. I like to fold the end of the ribbon in half, so it fits nicely through the holes without giving me much trouble!

I would keep your ribbon on the spool while threading the letters.  That way you won’t encounter the problem of too little or too much ribbon on each end.

IMG_5426To make sure that each banner piece stays in its place, I like to add a little bit of Scotch Tape on the backside of each piece.

Once each banner piece is secured, the banner is ready to hang!

IMG_5444I apologize for the weird lighting.  I took this picture three different times throughout the day, and this is the best I could get!

I promise the banner looks fantastic in person though!

I’ve made a few of these over the years for different occasions.  They’re great for any celebration you may have!

I hope you enjoyed this quick and easy tutorial!

Happy Crafting!!

Bow signature pink